3D Mathematics Section: Home, Camera Calibration, 3D
Scanning, Rubber-Sheeting/Warping/Morphing, Analog Digital Sensors, Cutting Heads-Router Bits, CNC Routers and Cutters, Motor Suppliers, SteppersServosPart
Keywords: Rapid Prototyping, Agile Engineering, CNC Manufacturing, Machine Replication, Stereolithography
Rapid Prototyping for Sculptors
- DeskProto, by Delft Spline Systems
- A Human Torso This project
is a DeskProto application in sculpturing art. The Dutch artist Mrs. Eja Siepman van den Berg is famous for the perfectly refined human torso sculptures that she produces in
white marble and other materials. As the completely manual production process of
these sculptures requires much time, effort and hard labour she has been looking
at new technologies to faciliate her work. One of the possibilities
is using CAD/CAM technology to create the final sculpture in stone, and thus to
use an NC machine to perform most of the heavy labour. In this project the
geometry again has been manually sculptured, however in plaster instead of in
stone. The plaster sculpture has been digitized using a 3D laser scanner, and
the resulting data have been used to create a 3D CAD-model
- Modela - Low Cost 3D
Printer under US$3000, 5 watt, (.15 x .10 x .04 meters operating area)
- CPM 3020 - Rapid Prototyping
under US$10,000, 900 watts, (.3 x .2 x .1 meters operating area)
- Korner CNC-500 - CNC
Milling, choice of motors (.42 x .38 x .22 meters operating area) Not available
in US.
- A Human Torso This project
is a DeskProto application in sculpturing art. The Dutch artist Mrs. Eja Siepman van den Berg is famous for the perfectly refined human torso sculptures that she produces in
white marble and other materials. As the completely manual production process of
these sculptures requires much time, effort and hard labour she has been looking
at new technologies to faciliate her work. One of the possibilities
is using CAD/CAM technology to create the final sculpture in stone, and thus to
use an NC machine to perform most of the heavy labour. In this project the
geometry again has been manually sculptured, however in plaster instead of in
stone. The plaster sculpture has been digitized using a 3D laser scanner, and
the resulting data have been used to create a 3D CAD-model
- The Future of
Rapid Prototyping Online Conference(30th June - 30th September 1998)
- Colour RP
<Discussion Papers | Join Discussion> - RP and Art
<Discussion Paper | Join Discussion> - RP for Medical Applications
<Discussion Paper | Join Discussion> - RP Safety
<Discussion Paper | Join Discussion> - Reverse Engineering
<Discussion Paper | Join Discussion> - Rapid Tooling
<Discussion Paper | Join Discussion> - RP Standards
<Discussion Paper | Join Discussion> - The RP Wish List
<Discussion Paper | Join Discussion> - Management Issues for RP
<Discussion Paper | Join Discussion - www.WohlersAssociates.com "Welcome to WohlersAssociates.com. Here, you can access 47 articles,
technical papers, reports, and other documents on rapid prototyping (RP), rapid
tooling (RT), 3D printing for concept modeling, CAD/CAM, and reverse
engineering." Terry Wohlers State of
the Industry Reports, RP
and RT Manufacturers and Developers
- Teleon Teleon Prototyping is a Dutch
"service" studio to
support product development: project
planning, design and engineering, communication, visualization, 3d
scanning, rapid
prototyping.
- The Rapid Prototyping
Report, Table of Contents, CAD/CAM
Publishing
- Art, Math,
and Computers, Carlo
H. Séquin, Berkeley, Sculpture
Generator
- Rapid
Prototyping Sites, Bremen Institute of Industrial Technology and Work
Science
- The
EOS Rapid Protyping System, EOS GmbH Electro Optical Systems
- Some thoughts on
computer use in the Metals/jewelry Field, Charles Lewtom-Brain
- Robot-Assisted
Shape Deposition Manufacturing, Carnegie Mellon University
- Three-Dimensional
Anthropometric Imaging Techniques, Wright-Patterson Air Force Base
- Parametric Technologies Corporation, Draft
Link (What Companies offer these services?)
- The Rapid Prototyping
Resource Center
- AltaVista Query on 3D Scanning, Rapid Prototyping and Sculpture
